Connectors

GR02 ('T' Piece)

'T' piece connector to extend the length of a rail.
Available in  Textured  Smooth  Textured    Smooth  Textured

GR02/30 (2-way Fitting 30º Degree Bend)

GR02/45 (2-way Fitting 45º Degree Bend)

2-way fitting that is used to join rails requiring a bend.
Available in  Textured  Smooth Textured   Smooth

GR02/90 (2-way Fitting 90º Degree Bend)

2-way fitting that is used to join rails requiring a 90º degree bend around a corner.
Available in  Textured  Smooth Textured   Smooth

GROCD (Internal Corner Connector)

2-way internal corner fitting that is used to install rails into an internal corner.
Available in  Textured  Smooth Textured   Smooth  Textured

ATC (Adjustable Tube Connector)

These connecting pieces work on the same principle as the beach umbrella and allow rails to be connected at angles up to 45º, up or down.
Available in  Textured  Textured

TC (Tube Connector)

Tube connector, connects two rails together in a straight line for a longer continuous run of rail.
Available in  Textured  Textured

GRO3W (3-way Connector)

Use GRO3W to connect a vertical rail to a horizontal rail. Often used for the mounting of a shower slide (SS) and shower handset (HH).
Available in  Textured  Smooth Textured   Smooth

GRO4W (4-way Connector)

Use GRO4W to connect a vertical rail to  horizontal rails, creating a 4-way intersection of rails.
Available in  Textured    Textured

E30 and WBL (30º Bend) E45 and WBL (45º Bend)

Allows for 270º hand travel required by Australian Standards. Supplied with WBL and modified dress rings to allow the cup of the bracket to be located anywhere beneath the bend of the rail. This means the bracket can be fixed at a secure support.
Available in  Textured  Textured

E90 (90º Bend)

Use an E90 connector in conjunction with a large wall bracket (WBL) to go around corners).
Available in  Textured  Textured