Connectors
GR02 ('T' Piece)
'T' piece connector to extend the length of a rail.
Available in
Textured
Smooth
Textured
Smooth
Textured
GR02/30 (2-way Fitting 30º Degree Bend)
GR02/45 (2-way Fitting 45º Degree Bend)
2-way fitting that is used to join rails requiring a bend.
Available in
Textured
Smooth
Textured
Smooth
GR02/90 (2-way Fitting 90º Degree Bend)
2-way fitting that is used to join rails requiring a 90º degree bend around a corner.
Available in
Textured
Smooth
Textured
Smooth
GROCD (Internal Corner Connector)
2-way internal corner fitting that is used to install rails into an internal corner.
Available in
Textured
Smooth
Textured
Smooth
Textured
ATC (Adjustable Tube Connector)
These connecting pieces work on the same principle as the beach umbrella and allow rails to be connected at angles up to 45º, up or down.
Available in
Textured
Textured
TC (Tube Connector)
Tube connector, connects two rails together in a straight line for a longer continuous run of rail.
Available in
Textured
Textured
GRO3W (3-way Connector)
Use GRO3W to connect a vertical rail to a horizontal rail. Often used for the mounting of a shower slide (SS) and shower handset (HH).
Available in
Textured
Smooth
Textured
Smooth
GRO4W (4-way Connector)
Use GRO4W to connect a vertical rail to horizontal rails, creating a 4-way intersection of rails.
Available in
Textured
Textured
E30 and WBL (30º Bend) E45 and WBL (45º Bend)
Allows for 270º hand travel required by Australian Standards. Supplied with WBL and modified dress rings to allow the cup of the bracket to be located anywhere beneath the bend of the rail. This means the bracket can be fixed at a secure support.
Available in
Textured
Textured
E90 (90º Bend)
Use an E90 connector in conjunction with a large wall bracket (WBL) to go around corners).
Available in
Textured
Textured